Fluid drying of Seeds in boxes

Drying installation for fluid drying of batches (soaked) seed and pellets in special drying boxes. The installation consist of dryingsections and a central hybrid air-dryer by condensation and adsorption.

The box will be placed into the drying section. Each box place is provided with a fan. Dry air will be pushed through every individual box to make the Medicinal & Aromatic Plants (MAP) fluid and to dry homogeneous.

The outlet for each box place has a T°+HR sensor to measure outcoming moist content. When this air is damp, it will be blown to the outside. When this air is dry, it will be recycled.

High-pressure fan with flow sensor for each box place.

Outlet with T°+HR sensor to control the process.

Box for wet MAP is provided with cover to avoid blowing out of the Medicinal & Aromatic Plants.

Seed pellets (up to 4 milj. per box) drying like little volcano’s; fast but with care.

Loose seed spread over the pellets to illustrate the volcano’s.

As an option each box place will be provided with a hot water radiator. Per phase the desired T° can be programmed individually; drying can start with high temperature because of all the moisture to be dehydrated.

Process to be programmed and controlled by a control panel with touchscreen and ABC software.

LED-lamps per box place for direct indication of the phase (blue last phase, white drying is ready).